Traditional mill needs another reducer, drive the spindle through coupling, installation is difficult to the middle, easy to produce noise, reduce efficiency, MTW Milling Machine for bevel gear overall transmission, more compact structure, installation and adjustment is more convenient, the efficiency is greatly improved.
MTW milling machine from SBM is the new generation product on the base of other grinding milling machines. It adopts the advanced technology and high quality materials. This will ensure the longer working time and high output. It is suitable for grinding barite, limestone, mica, clay and gold ore, iron ore etc.
MTW milling machine is mainly used in metallurgy, building materials, chemical industry, mines and other minerals-material grinding processing. It can grind the Moh's hardness below 9.3 materials, such as limestone, calcite, dolomite, barite, talc, calcium carbonate, gypsum, bentonite.
The working process of the main machine of MTW milling machine is to drive the central shaft to rotate through the overall transmission device of bevel gear. The grinding roller device not only rotates around the central axis, but also revolves around the grinding ring. There is a shovel tool under the hanger of the grinding roller, which is located at the lower end of the grinding roller. In the process of the same rotation between the shovel and the grinding roller, the material is thrown up and fed into the grinding ring of the grinding roller to form a cushion layer. The material layer is ground up by the centrifugal force (i.e. extrusion pressure) generated by the rotation of the grinding roller.
The traditional lubrication form of the mill is grease lubrication, the lubrication resistance is large, the temperature rises high, the bearing life is short, the MTW series Europe type mill USES the internal oil pump, does not need to add the oil pump or the lubrication station additionally, can realize the lubrication of the spindle bearing and the conical gear shaft bearing, greatly improves the service life of the equipment.
The air duct of the pulverizer in the traditional mill is straight plate type. This structure there is a flow wind but resistance and air molecules collide with each other between energy loss is big, easy to produce the shortcomings, such as eddy current cause the clogging in duct MTW series adopted by air duct for euro grinding surface type air duct, tangential air import smooth, small resistance, internal export direction is advantageous to the material dispersion, not easy plugging material.
The blade of the traditional grinding machine is worn quickly, and the blade is a whole blade. After the blade is worn, the whole blade needs to be replaced, which wastes materials and increases the downtime. The blade of MTW series European edition is made of high wear-resisting alloy material, which has a long service life. In addition, the traditional planar shovel knife, materials are piled up on a layer, making the middle of the grinding ring wear seriously, the curved shovel knife can guide the material to the facade, so that the upper, middle and lower part of the grinding ring can be ground, make it uniform wear, but also increase the effective working area, thereby increasing the output.
High material utilization: The blade is designed in a split type, and only the blade of the blade needs to be replaced when replacing; the blade is made of highly wear-resistant alloy material, which has a long service life and greatly reduces production costs. Thin oil lubrication: Built-in oil pump, without the need for additional oil pump or lubrication station, can realize the circulating lubrication of bearings such as the main shaft and gear shaft. Compared with traditional grease lubrication, it reduces the resistance and temperature and improves the bearing life.
+86-21-58386189, 58386176
No.416 Jianye Road, South Jinqiao Area, Pudong New Area, Shanghai, China.
Grinding Mill | Contact UsCopyright © Shibang Industry & Technology Group Co., Ltd.
Consultation